Sanyo Xacti VPC-CG10 Quick Manual

SA%YO
Dual Camera
VPC-CG10EX
VPC-CG10
VPC-CG10GX
Xacti
QUICK GUIDE
STEP 1
RECORD A VIDEO CLIP
Turn on the camera.
• Press the ON/OFF
button for at least
1 second.
• If the screen to
set the date and
time appears,
press the MENU
button 2 times to
cancel it.
Press the [IQ]
button to begin
recording a video
clip.
To stop recording,
press the [iq]
button again.
If the image is not captured...
Is there enough power left in the battery? Recharge
the battery pack.
(See "Charge the battery pack" on the reverse side.)
STEP 2
CAPTURE A STILL IMAGE
r
Turn on the camera.
You can capture a still image while recording
a video clip.
Press the uni
button to begin
recording.
To capture a single
shot while
recording, press the
[
0
] button.
•The scene at the
time the [Q]
button was
pressed is
captured as a still
image.