Connecting To Other Equipment - Sanyo Xacti VPC-C5 Instruction Manual

CONNECTING TO OTHER EQUIPMENT

Connecting to a computer or printer
Use the supplied USB interface cable to connect the DIGITAL/AV
terminal of the docking station to the USB terminal of a computer or
printer.
i Connect the dedicated USB interface cable to your computer's USB
connector. Do not connect it to the USB port on your monitor or keyboard,
or to the USB hub. Be especially careful when installing the driver
software. In some instances, it may not be possible to correctly install the
driver software.
i Please refer to the included SANYO Software Pack instruction manual for
information regarding operating your camera from a computer.
To AC adaptor/
charger
Connecting to a TV
Use the supplied S-AV interface cable to connect the docking station to
the TV.
i When the camera's monitor unit is closed and the camera is set in the
docking station, press the CAMERA/CHARGE button on the docking
station to light the CAMERA indicator.
i The remote control unit can be used for playback (page 145).
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
143
English
DIGITAL/AV terminal
Supplied USB interface cable
The [n] mark on the plug is facing down.
To USB connector on the
computer or printer