Sanyo Xacti VPC-C5 Instruction Manual page 120

DATE AND TIME
h Toggle the SET button up to change the displayed date order as
follows:
year/month/day → month/day/year → day/month/year → DISP OFF (no display)
Toggle the SET button down to change it in the reverse order.
h If "DISP OFF" is selected, the date the image was captured is not
shown during playback.
4 Press the SET button.
6
Select "EXIT", and press the SET button.
h The date and time setting is completed, and you are returned to the
Option Screen.
NOTE
i Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for about 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps 1 and 2).
To correct the date and time settings
i After steps 1 and 2, select the line of the setting that you want to change,
press the SET button, and follow the steps in the respective paragraphs
above to change the setting.
117
English