Cable Adaptor; Connections - Sanyo Xacti VPC-C5 Instruction Manual

CONNECTIONS

Using the supplied adaptor, you can connect the camera to a computer,
printer, TV or AC adaptor/charger, etc., without using the docking station.
1
Attach the adaptor to the docking station terminal on the bottom of
the camera.
2
Various devices can be connected to the adaptor terminals.
DC IN terminal:
Connect the supplied AC
adaptor/charger.
To docking station
terminal on the camera
NOTE
The remote control unit cannot be used.
i Unlike when using the camera in the docking station, when the adaptor is
connected, the remote control unit cannot be used to operate the camera.
To play back data from the camera, use the operation buttons on the
camera.
The battery cannot be recharged.
i When recharging the battery pack that is installed in the camera, set the
camera in the docking station. To recharge the battery pack without using
the docking station, remove the battery pack from the camera and set it in
the AC adaptor/charger to recharge it.
159
English
DIGITAL/AV terminal:
Connect to a computer, printer
or TV.
Supplied USB interface
cable or S-AV interface cable
Supplied AC adaptor/charger