Charging The Battery Pack - Sanyo Xacti VPC-CA6 Instruction Manual

CHARGING THE BATTERY PACK

Before using the supplied battery pack in the camera, it must be fully charged.
1
Insert the battery pack in the
battery charger.
h Insert it in the direction
indicated by the [o] mark
on the battery pack.
2
Connect the supplied power
cord to the socket on the
battery pack charger.
h Insert the connector straight
and securely.
3
Plug the power plug into a
power outlet (AC 100 V to
240 V).
h Recharging begins.
h During recharge, the
CHARGE indicator is lit red.
4
When the CHARGE indicator
turns off, unplug the power
cord from the power outlet,
and remove the battery pack
from the charger.
HINT
i If the camera becomes wet, after wiping off the moisture with a dry cloth,
remove the battery pack and recharge it.
i The recharge time is approx. 90 minutes.
19
English
CHARGE indicator
[o] mark
Battery pack
Socket
To power outlet
Power cord
Red indicator light