Electrodes Adjustment - Unigas E150X Manual Of Installation - Use - Maintenance

Electrodes Adjustment

Important Note: Check the ignition and detection electrodes after removing/adjusting the combustion head.
ATTENTION: avoid the ignition and detection electrodes to contact metallic parts (blast tube, head, etc.), other-
wise the boiler's operation would be compromised. Check the electrodes position after any intervention on the
combustion head.
Adjust the electrodes position, according to the quotes shown othe next picture
ER
E150X, E180X M-
EA: Ignition electrode
ER: Detection electrode
PART IV: MAINTENANCE
E115X M-
EA
EA: Ignition electrode
ER: Detection electrode
2÷3 mm
39
 ÷  mm