Table of Contents
Advertisement
The clock will now control the cook period of your oven(s).
The [
] symbol and [AUTO] will be displayed.
Once the 'cook period' is reached, the beeper sounds and the
[AUTO] symbol flashes. Turn the oven control knob to 0 and
then press any button to stop the beep. Press [
manual cooking.
Setting a cook end time
Press and hold the 'stop time' [
press the [+] button (or [–] button) until the required 'stop
time' shows (Fig. 6.8). The [
in the display.
Once the 'stop time' is reached, the beeper sounds and the
[AUTO] symbol flashes. Turn the oven control knob to 0 and
then press any button to stop the beep. Press [
manual cooking.
To start and stop the ovens automatically
Before you set the clock for automatic operation you must
have two numbers clearly in mind – the 'cook period' and the
'stop time' .
NOTE: You cannot set a start time directly – this is set
automatically by setting the 'cook period' and the 'stop time' .
Press and hold the [
] button (Fig. 6.9) and then press the
[+] button (or [–] button) until the required 'cook period'
shows (Fig. 6.10).
Now press and hold the [
press the [+] button (or [–] button) until the required 'stop
time' shows (Fig. 6.12). Release the buttons.
[AUTO] will now show in the display (Fig. 6.13).
Set the oven(s) to the required temperature. When cooking
is finished [AUTO] will flash and the beeper will sound. Turn
the oven knob(s) to the OFF position first, and then press any
button once to stop the beep; press the [
to manual cooking.
If you are out, do not worry about the beeper going off, it
stops after a while. When you return, turn the oven knob(s) to
0 first, and then press [
AUTO is showing, you want to reset to manual cooking
To return to manual cooking mode from an Automatic
setting, simultaneously press the [+] and [-] key, this will clear
the automatic program and return to manual mode.
NOTE: This action will also clear the [Minute Minder] setting.
Beeper tone adjustment.
The beeper tone can be adjusted to three different levels.
Whilst in the time of day mode, press and hold the [-] button
for a period until the display shows the Tone Bars (Fig. 6.14).
Release the [-] button and immediately press again, this will
adjust the tone down by a bar. Continue the process until a
comfortable, tone is reached.
NOTE: During a power reset the clock will remember the last
tone set.
For an overview of the functions refer to Table 6.2.
] to return to
] button (Fig. 6.7) and then
] symbol and [AUTO] will show
] to return to
] button (Fig. 6.11) and then
] button to return
] to return to manual cooking.
Fig. 6.7
ArtNo.302-0002 - 6BC annotated
Fig. 6.9
ArtNo.302-0002 - 6BC annotated
Fig. 6.11
ArtNo.302-0002 - 6BC annotated
Fig. 6.13
ArtNo.302-0002 - 6BC annotated
Symbol
Function
[
]
Sets the Minute Minder
Sets the duration / cook
[
]
period
Sets the end / stop cook
[
]
[
]
Allows the time of day to
or
be set when 'AUTO' is not
active
[
]
[
]
&
Resets the cooking control
[
]
to manual
[
]
Decreases time interval
-
[
]
Increases time interval
+
Clears all 'AUTO' and
[
]
[
]
+
&
-
minute minder programs
21
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
Notes
Used with the [+] and [-] buttons
Used with the [+] and [-] buttons
Used with the [+] and [-] buttons
time
Used with the [+] and [-] buttons
Holding this button down
allows a quick set
Holding this button down
allows a quick set
Table 6.2
Fig. 6.8
Fig. 6.10
Fig. 6.12
Fig. 6.14
Advertisement
Table of Contents
