HOLT ADK-8400 Quick Start Manual page 4

WARNING – Before using High Voltage equipment ensure that you use
the best safety operating practices, including, but not limited to the
following precautions :
Do NOT work with high voltage by yourself, have another person (safety
observer), qualified in first aid for electrical shock, present at all times.
Use rubber gloves where applicable and stand on approved
rubber matting. Note that not all so-called rubber mats are good isolators.
Always discharge the high voltage from components or terminals by using
a safety probe. Do NOT hold the test probe when circuits over 300 volts
are tested.
Always use equipment certified for operation at or above the peak
voltages being tested.
Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from
Holt Integrated Circuits
4