Jumper Position - HOLT ADK-8400 Quick Start Manual

Default Jumper Settings
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
JUMPER POSITION
J1 OFF
J4 2:1
J5 ON
J8 2:1
J10 2:1
J14 2:1
J12 OFF
J16 Open
J31 Closed
DESCRIPTION
Link to hold microprocessor in Reset (to use ext SPI)
Link 3:2 Selects 28V/Open type for Sensor 4
Link 2:1 Selects GND/Open type for Sensor 4
VLOGIC Link for supply current to U3 (disconnect to
measure HI-8400 VLOGIC supply current )
Link 3:2 Selects 28V/Open type for Sensor 3
Link 2:1 Selects GND/Open type for Sensor 3
Link 3:2 Selects 28V/Open type for Sensor 2
Link 2:1 Selects GND/Open type for Sensor 2
Link 3:2 Selects 28V/Open type for Sensor 1
Link 2:1 Selects GND/Open type for Sensor 1
Link to use USB 5V supply
Link 1:2 Selects non maskable interrupt
Link 2:3 Selects maskable interrupt
Link 1:2 Enables SENSEOUT [1:4] OF U3
Holt Integrated Circuits
14