Fortis FS27HCMEBKB User Manual page 19

Settings
Press and hold the A + C buttons together to enter the settings menu. In this menu you can
adjust the following parameters:
• Backlight brightness: 1-3 levels
• Milage unit (KM or MILE),
• Odometer reset.
Short press the B button to switch between the different parameter menus.
Backlight brightness
While in the settings menu, pressing A or B will adjust level of the backlight:
1: Darkest
2: Default
3: Brightest
Press and hold the A + C buttons together to save the value and exit the settings interface.
Mileage unit
While in the settings menu, press the A button to set the unit to KM (default). Press the C
button to set the unit to Miles.
Press and hold the A + C buttons together to save the value and exit the settings interface.
Reset Odometer
While in the settings menu, press and hold the A button for 5 seconds to reset the
odometer.
Press and hold the A + C buttons together to exit the settings interface.
Note: While inside the settings menu, if there is not user input for 10 seconds the value
will save and exit automatically.
19