Table of Contents
Advertisement
0 mm
b
(mm)
a
Maximum snowfall height
b
EKFT008D option kit
Option 4: On brackets to the wall with the EKFT008D option kit
The EKFT008D option kit is recommended in areas with heavy
snowfall.
b
(mm)
a
Maximum snowfall height
b
EKFT008D option kit
c
Anti-vibration rubber (field supply)
RRGA04~08DAV3
ROTEX HPSU Bi-Bloc Ultra
4P496756-1B – 2018.07
4.2.2
1 Lift the outdoor unit as described in
4×
2 Install the outdoor unit as follows:
c
3 Remove the protective cardboard and instruction sheet.
a
To install the outdoor unit
CAUTION
Do NOT remove the protective cardboard before the unit is
installed properly.
outdoor unit" on
page 4.
▪ (1) Put the unit into position (using the sling to the left and
the handle to the right).
▪ (2) Remove the sling (by pulling 1 side of the sling).
▪ (3) Fix the unit.
a
1
a
Air outlet
NOTICE
Properly align the unit. Make sure the backside of the unit
does NOT protrude.
4 Installation
"2.1.1 To handle the
2
a
3
2×
b
Installation manual
7
Advertisement
Table of Contents
