System Configuration And Installation - Advantech AMAX-5400 Series User Manual

Table 3.3: List of Verified Power Supply Units
2 PSD-A120W24
3 96PSD-A240W24-MN
The default power mode is AT mode, the system will boot as long as there is one
valid power input from 1 or 2. Please check below LED to make sure the system is
properly powered.
Table 3.4: LED Power Status
Model LED
AMAX-
PWR
5580
PWR
AMAX-
54XX
STBY
NOTE: Please do not assemble or disassemble the system while the PWR /STBY
LED is on. Please make sure power is completely off and every LED is off before
changing hardware.
To enhance the system availability, AMAX-5580 provides dual power input functions
to support main power input and backup power input. If either power input encoun-
ters trouble it will trigger the alarms below:
1. The LED "ERR VOL" turns "On"
2. The RL+ /RL- on the Power Input Terminal changes (Refer to p.20 ERR-LOG-
IC1)
3. The system tag changes and can be accessed remotely.
3.2

System Configuration and Installation

Please refer to section 1.1, table 2 to do the necessary configuration or maintenance.
Please follow below step to open the front cover to do access the internal system
components:
Step1: Remove the 7-pin power input wiring terminal on the top of the device
Step2: Remove the USB/HDMI fix kit from the front cover (Option)
Step3: Remove 2 screws on the lower side of the front cover
Step4: Move the cover upward slightly and move forward.
Do the following:
Install the M.2 SSD storage

This is the SSD storage for the operating system, we suggest using industrial
grade SSD to ensure system reliability. Please refer to the datasheet to check
the parts which have been verified as working well with the system.
After installing the SSD, please fix the SSD in the slots with the screws pro-
vided.
Install the PCIe-mini card module

Users can install a PCIe-mini card module in the PCIe-mini card slot. For exam-
ple:
DIN Rail AC to DC 100-240V 120W
24V
DIN Rail AC to DC 100-240V 240W
24V
Status
Green
Orange
Green
Orange
17
Definition
System Power OK
System Standby
System Power OK
System Standby
AMAX-5580 User Manual