30 Loading Motor Unit
31 Main Cam Unit
PARTS
32 Pinch Toggle
30 Loading Motor Unit
Threaded Hole
Pinch Toggle
Hole
Chassis
(S-1)
Reassembly Note:
1. Installation of the Pinch Toggle and the Main Cam
Unit
(1) Install the Pinch Toggle so that the Pinch Toggle Hole
fit over the Guide Pin.
(2) Install the Main Cam Unit so that Guide Pin fits in the
Main Cam Unit Hole.
2. Installation of the Loading Motor Unit
(1) Install the Loading Motor Unit the Guide Pin fits in Hole
on chassis.
(2) Tighten 2 Screws (S-1). If the 2 Screws (S-1) can not
reach Threaded Holes, push down on the upper side
of the Loading Motor Unit to tighten 2 Screws (S-1).
Fig. DM22
Threaded Hole
Guide Pin
31 Main Cam Unit
Main Cam Unit Hole
32 Pinch Toggle
Hole
Guide Pin
2-35