Panasonic Palmcorder VHSC PalmSight PV-L759 Service Manual page 22

Camera Recording
Simple Recording
Built-in Twin Capsule
2-Way Microphone
System
2
Tally Lamp
POWER PO WER
REC REC
4
REC
PHO PHOTO
VCR VCR CAMERA CAMERA
OFF OFF
1
SPEED
5
3
SP SLP
WARNING:
• Do not leave the camcorder with the
EVF aimed directly at the sun. This
may cause damage to the internal
parts of the EVF.
• When Camcorder is aimed at excessively
bright objects, or bright lights, a vertical
bar may appear in the picture. This is
normal for the CCD pick-up. Try to avoid
this when possible.
Camera Recording (continued)
Stand-by Quick Release
If left in RECORD/PAUSE mode for 5 minutes, Camcorder switches to Stand-by mode to
conserve battery. When set to ON, Stand-by Quick Release lets you resume recording by
pressing RECORD/PAUSE two times. New camcorders will default to OFF.
PHO PHOTO
VCR VCR CAMERA CAMERA
OFF OFF
RECORD/
1
PAUSE
UP UP
DOWN DOWN 2 3 4
, ,
DISPLAY DISPLAY MENU MENU
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab.
1
Set POWER to CAMERA.
Lens Cover opens.
EVF
• Be sure POWER
PAUSE USE
is fully turned to
CAMERA
position.
Record/Pause mode.
2
Look into Viewfinder and adjust
Vision Adjustment control to your
eyesight.
Underside View
Vision Adjustment
(PV-L859)
control
(PV-L759/PV-L779)
3
Slide TAPE SPEED to SP or SLP.
4
Press RECORD/PAUSE to start or
pause recording.
REC lamp lights
during recording.
RECORD RECORD
Tally lamp also
lights if set to ON.
5
Set Power to OFF when finished.
• To remove cassette,
slide TAPE EJECT in Record/
Pause mode.
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab.
1
Set POWER to CAMERA.
2
Press MENU for MENU mode.
Press UP or DOWN to select
STAND-BY RELEASE .
- - - MENU - - - PAGE 1/2
PROGRAMMED REC
TITLE ; AUTO/MANUAL
TALLY LAMP ; ON
STAND-BY RELEASE ; ON
CLOCK SET
SELECT : PUSH / KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
3
Press DISPLAY to select ON/OFF.
ON: From Stand-by mode,
press RECORD/PAUSE two times
to resume recording.
OFF: From Stand-by mode,
set POWER to OFF, then to
CAMERA.
Press RECORD/PAUSE to record.
4
Press MENU to exit.
Using the LCD Monitor
View recording scene on the LCD (Liquid
Crystal Display).
4
2
1
5
PHO PHOTO
VCR VCR CAMERA CAMERA
OFF OFF
PHONE (earphone)
jack
Easy Edit Stand-by
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
VCR VCR CAMERA CAMERA
OFF OFF
1 4
,
2
Manual Easy Editing
For proper continuity when taping from Stop mode or after attaching a new Battery.
STILL
C
DEL
PLAY
B
REW FF
+
A
STOP
2
4
VCR VCR CAMERA CAMERA
OFF OFF
1
1-4
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab.
1
Press LCD-OPEN to unlock LCD.
2
Swing LCD fully open and adjust
viewing angle.
Caution:
Rotating partially open LCD monitor
may block cassette door and damage
Camcorder body.
3
Set POWER to CAMERA.
• LCD monitor turns off/on by the
POWER switch.
• Viewfinder shuts off when LCD is
fully opened and turns back on
when LCD is closed completely.
• Both Viewfinder and LCD monitor
turn on when LCD is at 180° (see
above left).
This allows both you and the subject
to view the recording.
3
4
Turn BRIGHT control to adjust LCD
brightness level.
5
Press RECORD/PAUSE to start
recording.
Note:
• Using LCD reduces battery operation time.
• To hear sound while recording, connect
earphone (M3 type: not supplied) to
PHONE jack. Earphone volume cannot be
changed while in CAMERA mode.
• Lock LCD closed when not in use.
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab.
1
Press RECORD/PAUSE to stop
recording.
2
Set POWER to OFF and leave
cassette in Camcorder.
3
To resume recording, set POWER
to CAMERA.
4
Press RECORD/PAUSE to resume
recording.
PHOTO PHO
Note:
3
• Use Manual Easy Edit (below) if more than
24 hours before recording is resumed.
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab.
1
Set POWER to VCR.
2
A
Press REWIND/SEARCH to
rewind a few seconds of tape.
B
Press PLAY to review recording.
C
Press STILL where you want to
continue recording.
3
Set POWER to CAMERA.
PHO PHOTO
4
Press RECORD/PAUSE to resume
3
recording.