Disassembly/Assembly Procedures; Disassembly/Assembly Procedures Of Cabinet - Panasonic Palmcorder VHSC PalmSight PV-L759 Service Manual

DISASSEMBLY/ASSEMBLY PROCEDURES

DISASSEMBLY/ASSEMBLY PROCEDURES OF CABINET

DISASSEMBLY FLOW CHART
This flow chart indicates the disassembly steps of the cabinet parts and the P.C.Boards in order to gain access to item (s) to be
serviced. When reassembling, perform the step (s) in the reverse order. Bend, route and dress the wires as they were originally.
1 Cassette Cover Unit
with LCD Unit
2 EVR Cover
3 Side Case L Unit
4 Sensor Shield Case
5 Lens Unit
6 Main C.B.A.
7 VCR Mechanism
Chassis Ass'y
8 Side Case R Unit
SIDE CASE R PORTION
1 MIC Case Unit
2 Top Operation Unit
3 CF Card Connector
Unit
4 Battery Catcher Unit
LENS PORTION A
1 CCD C.B.A.
2 Filter Rubber
3 Optical Filter
LENS PORTION B
1 Lens Piece Unit
2 MF VR Unit
3 Focus Motor
4 Zoom Motor
Note :
a. When removing the cabinet, work with care so as not to break the Locking Tabs.
b. Place a cloth or some other soft material under the P.C. Boards or Unit to prevent damage.
c. When reinstalling, ensure that the connectors are connected and electrical components have not been damaged.
d. Do not supply power to the unit during disassembly and reassembly.
LCD PORTION
1 Cassette Cover Unit
2 Relay C.B.A.
3 Cassette Frame
4 LCD Case A Unit
5 LCD Shield Case
6 LCD Shaft Unit
7 LCD Case B
8 LCD C.B.A.
9 LCD Panel Unit
10 LCD Lamp Unit
SIDE CASE L PORTION
1 EVF Unit
(Color EVF Unit)
2 Side L FPC Unit
3 PC Out Jack C.B.A.
LAMP PORTION
1 Light Cover
2 Lamp
Fig. D1
2-1
COLOR EVF PORTION (Model: C)
1 Eye Cap Unit
2 EVF Case A
3 EVF Case B Unit
4 Lock Knob
5 VCR Operation Unit
6 Color EVF A C.B.A.
7 Color EVF B C.B.A.
8 LCD Cushion
9 EVF LCD Panel Unit
10 EVF Lens Cover A
11 Protect Plate
12 EVF Lens Cover B
13 EVF Lens Holder
EVF PORTION (Model: A, B)
1 Eye Cap Unit
2 EVF Case A
3 EVF Dust Cover
4 EVF Case B Unit
5 VCR Operation
Unit
6 CRT
7 DY Ass'y
8 EVF C.B.A.