Table of Contents
Advertisement
Symptom
The unit does not work, no
light.
No response to the DMX con‐
troller.
If the procedures recommended above do not succeed, please contact our Service Center. You
can find the contact information at www.thomann.de.
Remedy
Check the mains connection and the fuse.
1. Check the DMX ports and cables for proper connection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or alongside to
high voltage cables that may cause damage or interfer‐
ence to DMX interface circuits.
LED Vintage Bowl50 RGBA LED Vintage Bowl30 RGBA
LED PAR
Troubleshooting
43
Advertisement
Table of Contents
