Table of Contents
Advertisement
Colour selection
Press [M]. Press one of the arrow buttons repeatedly until the display shows 'COLO' . Press [OK].
Now you can set a basic colour for the preprogrammed automatic shows. Use the arrow but‐
tons to select a value between 1 and 4 (display shows 'C-01' ... 'C-04' ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and return to the main menu. To return to the
main menu without making changes, press [M].
LED Vintage Bowl50 RGBA LED Vintage Bowl30 RGBA
LED PAR
Operating
31
Advertisement
Table of Contents
