Stairville LED Vintage Bowl50 RGBA User Manual page 30

Operating
Manual test
Fade speed
LED Vintage Bowl50 RGBA LED Vintage Bowl30 RGBA
30
LED PAR
Press [M]. Press one of the arrow buttons repeatedly until the display shows 'TEST' . Press [OK].
Press one of the arrow buttons repeatedly until the display shows 'RED' , 'GREE' , 'BLUE' ,
'AMBE' or 'STRO' . Press [OK]. Now you can set the brightness of the red, green, blue or amber
LEDs each in a range from 0 to 255, or select the strobe rate in a range of 0 to 24.
This mode is also suitable for generating constant or flashing light of a colour mixed from the
four LED colours without DMX control.
When the display shows the desired value press [OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M].
Press [M]. Press one of the arrow buttons repeatedly until the display shows 'FADE' . Press [OK].
Now you can set the fade speed of the preprogrammed automatic shows. Use the arrow but‐
tons to select a value between 1 and 7 (display shows 'F-01' ... 'F-07' ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and return to the main menu. To return to the
main menu without making changes, press [M].