Product Introduction; Product Description; Composition; Models And Technical Characteristics - Key Automation HALO Instructions And Warnings For Installation And Use

2 - PRODUCT INTRODUCTION

2.1 - Product description

Halo is an irreversible electromechanical gearmotor suitable for
automating overhead doors up to 17m
19m . Halo is equipped with an encoder, a control unit and an inte-
2
grated 4-channel receiver. The rail is pre-assembled with a belt, in
one piece or 3 pieces.
A special aluminium rail, powder coated and with integrated LEDs,
allows for garage lighting both during movement and at any other

2.2 - Composition

The automation system for garage doors is contained in two boxes
forming the automation system's and the rail system's packaging:

2.3 - Models and technical characteristics

CODE DESCRIPTION
For sectional doors up to 11 sqm (with 3 m guide) or 12 sqm (with 4 m guide), a 24 Vdc motor and a
900HA8
control unit with an integrated receiver
For sectional doors up to 16 sqm (with 3 m guide) or 19 sqm (with 4 m guide), a 24 Vdc motor and a
900HA12
control unit with an integrated receiver
For sectional doors up to 16 sqm (with 3 m guide) or 19 sqm (with 4 m guide), "Low Energy" with 24
900HA12E
Vdc motor and a control unit with an integrated receiver
For sectional doors up to 16 sqm (with 3 m guide) or 19 sqm (with 4 m guide), a 24 Vdc motor and a
900HA12L
control unit with an integrated receiver and 120Vac power supply
HEAD/RAIL COMPATIBILITY
900RAB31
900RAB3X1P
900RAB41
900RAB61
900RAL31
900RAL41
TECHNICAL SPECIFICATIONS
Speed
Force
Max cycles/hour
(1)
Max consecutive cycles/hour
Rated power
Stand-by power
Power supply
Flashing
Courtesy light on rail with integrated LEDs
Accessories power output
Fuse 1 power line
Max no. of transmitters that can be stored
ROLLING CODE
Degree of protection
Use in highly acid, saline or explosive
atmosphere
Dimensions (L x D x H):
Weight
Working temperature
Maximum door size
Maximum door weight
for door up to 2m in height
(1)
and sectional doors up to
2
900HA8
15 cm/s
800 N
20
10
(1)
80w
5,5 W
230vac (±10%)
50hz
3 W Max
-
1AT
90
IP 20
No
235-330-84 mm
6,25 Kg
-10°C/+45°C
12 m
2
120 Kg
time.
The special flat design of the motor housing also makes it possible
to install it less invasively near the door cross beam or the spring
holder shaft.
FIG. 1 head package contents with parts list
FIG. 2 LED rail
FIG. 3 single piece steel rail
FIG. 4 3-piece steel rail
HA8
X
X
X
900HA12 900HA12E
15 cm/s 15 cm/s
1200 N 1200 N
20 20
10 10
100w 100w
5,5 W <0,5 W
230vac (±10%) 230vac (±10%)
50hz 50hz
3 W Max 3 W Max
40 W Max 40 W Max
100mA (24 Vdc not regulated)
1AT 1AT
90 90
IP 20 IP 20
No No
235-330-84 mm 235-330-84 mm
6,8 Kg 6,8 Kg
-10°C/+45°C -10°C/+45°C
19 m 19 m
2
200 Kg 200 Kg
POWER
800N
1200N
1200N
1200N
HA12 - HA12E - HA12L
X
X
X
X
X
X
900HA12L
15 cm/s
1200 N
20
10
100w
5,5 W
120vac (±10%)
50/60hz
3 W Max
40 W Max
2AT
90
IP 20
No
235-330-84 mm
6,8 Kg
-10°C/+45°C
19 m
2 2
200 Kg
EN
5