Led Reference Guide - Alarm.Com ADC-V515 User Manual

LED REFERENCE GUIDE

Mode
Internet
The camera is connected to Wi-Fi.
Connection
No Internet
The camera is not connected to Wi-Fi.
Connection
Boot Up The camera is powering on.
The camera is in Wi-Fi pairing mode.
Wi-Fi To enter this mode, press and hold the
Pairing button on the back of the camera until
the LED is flashing white.
The camera is resetting to factory default.
To enter this mode, press and hold the
Factory
button on the back of the camera until
Reset
the LED is alternating between red and
green.
• WARNING: A factory reset will restore factory-default settings to the camera.
!
If already installed, the camera may need to be removed from your Frontpoint
system and re-added through the App Setup after the reset.
6
Description LED Behavior
Solid Green
Solid Red
Flashing Red
Flashing White
Flashing Red &
Green