Racing RAC1836ECS User Manual page 5

CAUSES AND OPERATOR PREVENTION OF KICKBACK:
Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and
back towards the operator.
Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back
towards the operator.
Either of these reactions may cause you to lose control of the saw which could result in serious
personal injury. Do not rely exclusively upon the safety devices built into your saw. As a chain saw
user, you should take several steps to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can
be avoided by taking proper precautions as given below:
Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both
hands on the saw and position your body and arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator, if proper precautions are taken. Do not let go of
the chain saw.
Do not overreach and do not cut above shoulder height. This helps prevent unintended tip
contact and enables better control of the chain saw in unexpected situations.
Only use replacement bars and chains specified by the manufacturer. Incorrect replacement
bars and chains may cause chain breakage and/or kickback.
Follow the manufacturer's sharpening and maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased kickback.
ADDITIONAL INSTRUCTIONS
 It is recommended to use of a residual current device with a tripping current of 30 mA or less.
 WARNING! When using this type of power tool, basic precautions should always be followed to
reduce the risk of fire, electric shock and injury.
 Position the cord so that it will not be caught on branches and the like, during cutting
 It is recommended that the first-time user should, as a minimum practice, cutting logs on a
saw-horse or cradle
 Read all instructions carefully before attempting to use this product and retain these
instructions. Be familiar with all the operations described in these operating instructions. This
product must be operated by experienced users.
 If you are giving this machine to others, please also provide them with this instructions manual.
 Also read all markings on the product. The symbols on the tools are explained in the manual.
 Use this machine as described in this instruction manual. It is strictly forbidden to use this tool
for applications other than those described in this manual.
 Failure to follow these instructions can result in serious injuries and, in some cases, death.
 This product is intended for private domestic use only. Do not use it for commercial purposes.
 Never let people unfamiliar with these instructions or children use this product.
 National regulations may limit the use of the machine.
 People under the age of 18 must not use this product
 Keep in mind that the operator or user is responsible for accidents or risks to other persons or
their property.
 Do not use the tool if you are drunk, tired, under the influence of drugs or ill. Do not use the tool
if you are not in an adequate physical condition.
 This tool is intended for outdoor use. Never use it indoors.
 When transporting the machine:
o Secure the machine during transport to prevent, damage or injury.
o Use a carrying case to protect the cutter during transport.
 Keep people and animals away from the work area. Children and people who do not know how
to use this tool should not touch it and handle it.
 Keep them at least 15 m from the machine during operation,
5