Transportation, Handling And Storage; Unpacking; Transportation And Handling; Disposal Instruction - Danfoss Optyma OP-UPAC015COP04E Application Manuallines

Application Guidelines

7. Transportation, handling and storage

7.1 Unpacking

When unit reaches your warehouse, inspect the packing for any visible damage and make sure it is in good condition. In the event you
detect any damage, please contact your forwarder immediately: send a registered letter to the shipping company claiming the suffered
damage, a copy of which should be sent responsible contact in Danfoss.

7.2 Transportation and handling

Move the condensing unit only with appropriate mechanical or handling equipment according to weight. It is recommended not to open
the packaging before the unit is at the final place for installation. Handle the unit with care. The packaging allows for the use of a forklift or
pallet jack. Use appropriate and safe lifting equipment. Store and transport the unit in an upright position. After unpacking, check that the
unit is complete and undamaged.

7.3 Disposal Instruction

Equipment containing electrical components must not be disposed of together with domestic waste.
It must be separately collected with electrical and electronic waste according to local and currently valid legislation.
46
AB408540130380en-000102 © Danfoss | Climate Solutions | 2023.02