Appendix - Install A Uart Driver On Esp-Launcher - Espressif ESP32 Manual

!
I.
Use a micro-USB cable to connect the ESP-Launcher to the PC. The UART driver will be
installed automatically. A dialogue window will appear as the following picture shows:
When the installation finishes, a dialogue window will appear as the following picture
shows:
�� Note:
If the UART driver installation fails, users can install ./Tools/ft232r-usb-uart.zip provided by Espressif.
The EspRFtestTool will automatically check the port number that will appear in the drop-
down menu in the serial configuration section.
Espressif
Appendix - Install a UART
Driver on ESP-Launcher
Figure Ⅰ-1. Installing UART Driver on the PC
!
Figure Ⅰ-2. UART Driver Installed
15 19 ! /!
Appendix I
2018.03