1. Manuals
  2. Brands
  3. Espressif Manuals
  4. Microcontrollers
  5. ESP32-C6-DevKitC-1
  6. User manual

Espressif ESP32-C6-DevKitC-1 User Manual

Hide thumbs
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
»
ESP32-C6-DevKitC-1
» ESP32-C6-DevKitC-1
ESP32-C6-DevKitC-1
[中文]
This user guide will help you get started with ESP32-C6-DevKitC-1 and will also provide
more in-depth informa on.
ESP32-C6-DevKitC-1 is an entry-level development board based on ESP32-C6-WROOM-1,
a general-purpose module with a 8 MB SPI flash. This board integrates complete Wi-Fi,
Bluetooth LE, Zigbee, and Thread func ons.
Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.
Developers can either connect peripherals with jumper wires or mount ESP32-C6-DevKitC-1
on a breadboard.
ESP32-C6-DevKitC-1
The document consists of the following major sec ons:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ESP32-C6-DevKitC-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Espressif ESP32-C6-DevKitC-1

Summary of Contents for Espressif ESP32-C6-DevKitC-1

  • Page 1 » ESP32-C6-DevKitC-1 ESP32-C6-DevKitC-1 [中文] This user guide will help you get started with ESP32-C6-DevKitC-1 and will also provide more in-depth informa on. ESP32-C6-DevKitC-1 is an entry-level development board based on ESP32-C6-WROOM-1, a general-purpose module with a 8 MB SPI flash. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread func ons.
  • Page 2 Related Documents: Links to related documenta on. Getting Started This sec on provides a brief introduc on of ESP32-C6-DevKitC-1, instruc ons on how to do the ini al hardware setup and how to flash firmware onto it. Description of Components ESP32-C6-DevKitC-1 - front The key components of the board are described in a clockwise direc on.
  • Page 3 Addressable RGB LED, driven by GPIO8. Used for current measurement. See details in Sec on Current Measu Start Application Development Before powering up your ESP32-C6-DevKitC-1, please make sure that it is in good condi on with no obvious signs of damage. Required Hardware ESP32-C6-DevKitC-1...
  • Page 4 Contents and Packaging Retail orders If you order a few samples, each ESP32-C6-DevKitC-1 comes in an individual package in either an sta c bag or any packaging depending on your retailer. For retail orders, please go to h ps:/ /www.espressif.com/en/company/contact/buy-a-sample.
  • Page 5 3V3 and GND pin headers It is recommended to use the first op on: USB Type-C to UART Port. Current Measurement The J5 headers on ESP32-C6-DevKitC-1 (see J5 in Figure ESP32-C6-DevKitC-1 - front) can be used for measuring the current drawn by the ESP32-C6-WROOM-1 module: Remove the jumper: Power supply between the module and peripherals on the board is cut off.
  • Page 6 Name Type Func on I/O/T GPIO3, LP_GPIO3, LP_UART_CTSN, ADC1_CH3 5 V power supply Ground – No connec on Name Type Func on Ground I/O/T U0TXD, GPIO16, FSPICS0 I/O/T U0RXD, GPIO17, FSPICS1 I/O/T GPIO15 I/O/T GPIO23, SDIO_DATA3 I/O/T GPIO22, SDIO_DATA2 I/O/T GPIO21, SDIO_DATA1, FSPICS5 I/O/T GPIO20, SDIO_DATA0, FSPICS4...
  • Page 7 No previous versions available. Related Documents ESP32-C6-DevKitC-1 Schema c (PDF) ESP32-C6-DevKitC-1 PCB Layout (PDF) ESP32-C6-DevKitC-1 Dimensions (PDF) ESP32-C6-DevKitC-1 Dimensions source file (DXF) For further design documenta on for the board, please contact us at sales@espressif.com. Provide feedback about this document...

Table of Contents