Installation - Siemens FC2025 Manual

FS20 Marine Fire Detection Control Panel

Installation

19.2
1
2
3
4
INSTALLATION
1. Loosen the fixing screws (2) on the top part of the enclosure and remove
2. Position the back box such that the cables can be led correctly through the
3. Drill the holes and secure the back box (3) to the wall by inserting dowel screws
4. Wire up the device according to the wiring diagram.
5. Fix the cables to the slots (4) with cable ties and mount the enclosure on the
104
Siemens Industry, Inc.
Building Technologies Division
2
Ft2015-xx Installation view
Installation for the FT2015 terminal
Enclosure
2x fixing screw on the top of the
enclosure
Back box
3x slot for cable tie
the enclosure (1) from the back box (3), by gently lifting it up and pulling
it forward.
cable entry (7). Mark the fixing slots (6) in this position.
through the fixing slots (6).
back box in reverse order to the description under step 1.
4
5
6
3
2
8
1
5 2x threaded hole for fixing screws
6 8x fixing slot for wall mounting
7 Cable entry
8 2x holder cam for enclosure
7
5
8
A6V10519176_enUS_b