Bit Word Connector Wiring - Essex Electronics K1 Series Installation Instructions Manual

8 Bit Word Connector Wiring


CONFIGURATION
PINS- "CONFIG"
YELLOW- LED Control
(Do NOT apply voltage)
PINK- NOT USED
(Do NOT apply voltage)
TAN- Earth Ground
BLUE- CCTV
VIOLET- NOT USED
NOTE: The 2x6 connector is rotated 180 degrees
BLUE - CCTV
Pressing any position on the Keypad will generate a 30 second 0.25
amp intermittent duty grounding output.
ORANGE - LED Control
The ORANGE wire allows the choice of controlling the RED &
GREEN LED's on the Keypad with either 1 wire (BROWN) or 2
wires (BROWN & YELLOW).
12 Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
VOLTAGE SELECT
(Do NOT apply voltage)
12-24V (default)- Jumper on
one pin only
5V- Jumper on both pins
BROWN- LED Control
(Do NOT apply voltage)
BLACK- Ground
ORANGE- LED Select
(Do NOT apply voltage)
RED- Input Voltage
WHITE- Data 1's
GREEN- Data 0's