Page 2
All rights reserved. No part of this documentation may be repro- duced in any form, without prior written consent of Essex Electron- ics, Inc. Essex Electronics shall not be liable for errors contained in this manual. The information in this document is subject to change without notice.
Open Collector, 1/4 A Max to Ground Keypad Switch Life: >1 Billion Cycles Keypad Operating Environment: -40°C to +70°C (-40°F to +160°F), 100% Relative Humidity continued next page Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Alarm, this switch will trigger the alarm if the door is opened without a code or if the door is left open longer than the Door Ajar Time setting. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 8
12-24VDC BLUE Power Power Supply Supply BLACK BLACK YELLOW YELLOW Across BLUE Existing FAIL SECURE Push VIOLET VIOLET FAIL Button SAFE GRAY TAN Earth Ground TAN Earth Ground Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
LED’s will flash and the Keypad will beep continuously. Keypad Reset In certain cases you may want to erase all user codes and restore system defaults. To perform this procedure: Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 11
Keypad Output Configuration Self-Contained - Non-encoded 99 # b. (OPTIONAL) To change the audible beep, enter Code Audible Beep 201 # Normal Beep (factory default) 200 # Short Click (quieter) Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 12
(the RED LED will continue to flash and the GREEN LED will be solid). If you hear a long error beep, re-enter the configuration number followed by #. 7. Remove power. 8. Remove configuration jumper. 9. Re-apply power. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
1. CCTV or Light Controller - First key press triggers a Timed Out- put (1 to 99 seconds). 2. Auxiliary Output - Manual Control or Timed Output (1 to 99 sec- onds). Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Beeper needs to be quieter or the Illumination needs to be activated on the SKE-26 only. The Default Master Code is: 1 2 3 The Relay On Time is: 5 sec Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Note: If you forget the Master Code, momentarily ground the ORANGE wire. This will take you to Step 3 of Programming System Setup. Once you enter setup mode, you have 30 seconds to begin the program sequence. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 17
Beep Red LED Green LED Double Fast Flash Slow Flash Triple Fast Flash Solid Configuring Output A (Default: Aux #1) a. Enter b. Select one of the following: CCTV / External Light 1) Enter Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 18
Return to Step 3 or enter to exit programming. Keypad Status After Step Completion Step Beep Red LED Green LED Double Fast Flash Slow Flash Double Fast Flash Fast Flash Triple Fast Flash Solid Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 19
Timed- Enter the desired time interval in hours (1-98), fol- lowed by Example: 5 # 3 # 5 # 9 9 # (Sets Second Door with 5 second Door Open Time and Manual Latching) Doorbell 1) Enter Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 20
Enter to prevent lockout c. Enter to lockout all users that do not have 24 hour option enabled. d. Return to Step 3 or enter to exit programming. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Turn Output B ON (3 Output as Aux.) Tamper Alarm An audible Tamper Alarm sounds when four incorrect code entries are made. After 30 seconds, the unit returns to standby mode. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Repeat for additional authorizations. Code User Authorization Latching Authorization Program or Delete Users Authorization Output A Authorization (see notes) 2nd Door (see notes) Output B Authorization (see notes) Continued on next page Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 23
24-hour Access requires an external time clock or keyswitch. This allows you to restrict access to Users who are not assigned 24-hour Access. See Time Clock Input on page 16. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 24
Enter b. Enter the User Code for the User you wish to modify, followed c. To change this User’s Code, enter the New User Code followed by - OR, see step d on next page - Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 25
Step 3, or if you have completed all User Programming, enter a sec- ond time to complete programming sequence and reset system to normal operation. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 26
You are now back to Step 3 (page 18). Deleting a Temporary User a. Enter b. You are now back to Step 3 (page 18). 4. Enter to complete the sequence and reset the system to normal operation. Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
This Limited Warranty also does not apply to any product on which the original identification or date of manufacture information has been Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 29
KE-1000, KE-1900 and SKE-34 used in an elevator access control installation. Essex Electronics, Inc.’s liability and Buyer’s remedy under this warranty is limited to the repair or replacement at Seller’s election Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...
Page 30
Buyer’s expense and shown to Essex Electronics Inc.’s reasonable satisfaction to have been defective. Notice of any defect must be sent in writing to Essex Electronics, Inc., 1130 Mark Avenue, Carpinteria, California, 93013, USA and must include the date code of the unit, description of the defect and factory assigned Return Authorization #.
Page 31
All non-warranty repair freight charges are paid for by the customer. Non-warranty repair charges must be paid by credit card. (Factory Authorized Distributors are subject to standard terms). Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com...