Reaction after fault recti-
fication
PLICSMOBILE T81/B81/S81 • External GSM/GPRS/UMTS radio unit
Error
Reason
E042
Hardware error with self-
check
E053
Sensor measuring range
is not read correctly
E086
Error communication
hardware (initialisation of
the radio module failed)
Depending on the reason for the fault and the measures taken, the
steps described in chapter "Set up" may have to be carried out again.
8.3
How to proceed if a repair is necessary
You can find an instrument return form as well as detailed informa-
tion about the procedure in the download area of our homepage:
www.vega.com.
By doing this you help us carry out the repair quickly and without hav-
ing to call back for needed information.
If a repair is necessary, please proceed as follows:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Please contact the agency serving you to get the address for
the return shipment. You can find the agency on our home page
www.vega.com.
Note:
If a battery-operated instrument is returned for repair, the battery/
power pack must be removed. Please send only the instrument, not
the battery/power pack.
8 Maintenance and fault rectification
Rectification
Send instrument for repair
Communication error: Check sensor
cable and screening
Initialisation is carried out automatical-
ly. If the error exists permanently, send
instrument for repair
33