Led Explanation; Button Description - TP-Link RE900XD User Manual

Chapter 1
1 2 1

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
(Power)
2.4G
5G
(Signal)
1 2 2

Button Description

Button
/ / WPS
Reset
Status Indication (For Range Extender Mode)
On/Off The extender is on or off.
The system is starting up or firmware upgrade is in
Blinking
progress.
The extender is connected or not connected to the
On/Off
2.4GHz wireless network of your host router.
The extender is connected or not connected to the 5GHz
On/Off
wireless network of your host router.
The extender is connected to your router's wireless
Solid blue
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating it
Solid red
closer to your host router.
Blinking WPS connection is in progress.
Off No wireless connection is established.
On/Off LAN port 1/2/3 is connected or not connected.
Press the WPS button on your host router, and immediately press
this button on the extender for 1 second. The
should change from blinking to solid on, indicating successful WPS
connection.
Use a pin to press the button for 1 second to reset the extender.
Get to Know About Your Extender
Description
LED of the extender
5