Led Explanation; Button Description - TP-Link RE715X User Manual

Chapter 1
1. 2. 1.

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
(Power)
(Signal)
2.4G
5G
1. 2. 2.

Button Description

Button
(WPS)
Reset
Status Indication (For Range Extender Mode)
On/Off The extender is on or off.
Blinking The system is starting up or firmware is being upgraded.
The extender is connected to your router's wireless
Solid blue
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating it
Solid red
closer to your host router.
Blinking WPS connection is in progress.
Off No wireless connection is established.
The extender is connected or not connected to the
On/Off
2.4GHz wireless network of your host router.
The extender is connected or not connected to the 5GHz
On/Off
wireless network of your host router.
Press the WPS button on your host router, and immediately press
this button on the extender for 1 second. The
should change from blinking to solid on, indicating successful WPS
connection.
Use a pin to press the button for 1 second to reset the extender.
Get to Know About Your Extender
Description
LED of the extender
5