Table of Contents
Advertisement
Chapter 1
1 2 1
LED Explanation
You can check the extender's working status by following the LED Explanation table.
Name
(Power)
(Signal)
2.4G
5G
1 2 2
Button Description
The buttons are on the side panel of the product.
Button
/
/ WPS
Reset
Status
On/Off
The extender is on or off.
Blinking
The system is starting up or firmware is being upgraded.
The extender is connected to your router's wireless
Solid blue
network and is in a suitable location.
The extender is receiving a weak signal. Try relocating it
Solid red
closer to your router.
Blinking
WPS connection is in progress.
Off
No wireless connection is established.
The extender is connected or not connected to the
On/Off
2.4GHz wireless network of your router.
The extender is connected or not connected to the 5GHz
On/Off
wireless network of your router.
Press the WPS button on your router, and immediately press this
button on the extender for 1 second. The
should change from blinking to solid on, indicating successful WPS
connection.
Use a pin to press the button for 1 second to reset the extender.
Get to Know About Your Extender
Indication
Description
LED of the extender
5
Advertisement
Table of Contents
