Panasonic WV-CU650 Operating Instructions Manual page 78

Default settings of camera-unit maps
Cam
001 to 016
017 to 032
033 to 048
049 to 064
065 to 256
4. Rotate the shuttle ring clockwise or move the 3D joy-
stick to the right. The cursor will jump to the next item.
Note: To return to Step 3, rotate the shuttle ring coun-
terclockwise or move the 3D joystick to the left.
5. Select a desired unit number by performing either of the
following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
Cam-Unit Map
Cam016
Note: You can select a unit number from 1 to 99.
6. Press the ENTER or CAM (SET) button.
"Set OK?" will appear on the LCD.
Cam-Unit Map
Cam016
Note: To cancel the setting, press the EXIT or MON
(ESC) button. The LCD display will return to Step 6.
7. Press the ENTER or CAM (SET) button again.
The specified camera channel and unit number will be
set for the selected camera-unit map.
"Memory" will appear on the LCD for a few seconds,
and the LCD display will return to Step 1.
Cam-Unit Map
Cam016
To delete a camera-unit map
1. Perform Step 1 to 3 in p. 77 Associating Camera
Numbers with Unit Numbers.
2. Press the CLEAR button.
"Clear OK?" will appear on the LCD.
Cam-Unit Map
Cam016
Note: To cancel deleting the setting, press the EXIT or
MON (ESC) button.
78
Unit
01
02
03
04
– –
408
Unit02
408
Set OK?
408
Memory
408
Clear OK?
3. Press the ENTER or CAM (SET) button.
The camera-unit map will be deleted.
"Erased" will appear on the LCD for a few seconds, and
the LCD display will return to Step 3.
Cam-Unit Map
Cam016
Note: After all the camera-unit maps have been delet-
ed, "Cam000" will appear for the camera channel
area.
G Associating Recorder Numbers with
Unit Numbers
You can register HDD-unit maps (the association settings of
recorder numbers and unit numbers). Up to 16 HDD-unit
maps can be registered. You can select a recorder by
entering a desired recorder number.
Note: As the factory default, recorder numbers have been
associated with unit numbers having the same num-
bers. ("HDD01" with "Unit01", "HDD02" with "Unit02"...)
1. Display "HDD-Unit Map" sub menu. (Refer to Step 1 to
4 of p. 61 To Recall Menu Functions.)
HDD-Unit Map
HDD01
2. Select a desired recorder number by performing either
of the following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
HDD-Unit Map
HDD06
Note: You can select a recorder number from 1 to 16.
3 .Rotate the shuttle ring clockwise or move the 3D joy-
stick to the right. The cursor will jump to the next item.
Note: To return to Step 2, rotate the shuttle ring coun-
terclockwise or move the 3D joystick to the left.
4. Select a desired unit number by performing either of the
following.
• Rotate the JogDial clockwise or counterclockwise.
• Press the + or – button.
HDD-Unit Map
HDD06
408
Erased
409
Unit01
409
Unit06
409
Unit05