Recorder Control; I Manual Recording; I Playback; I Search Playback - Panasonic WV-CU650 Operating Instructions Manual

RECORDER CONTROL

From this system controller, you can control the following
functions of digital disk recorders supporting PS·Data. You
will control a recorder in the status in which a recorder has
been selected.
Note: Some parts of monitor displays, described on this
document, may differ from the actual status.

I Manual Recording

1. To start the recording, press the REC button.
Recording will be started.
2. To stop the recording, press the REC button again for
two seconds.
Note:
Refer to the operating instructions of recorder for the
available recording modes and total recording time.

I Playback

1. Select a desired recorder.
Refer to p. 41 Recorder Selection.
2. Select a camera whose picture you wish to play back.
Refer to p. 42 Camera Selection.
When camera selection is not necessary, skip to Step 3.
3. To start playback, press the PLAY/PAUSE button.
The playback will be started.
Note: The playback start point differs depending on
recorders. (Refer to the operating instructions of
recorder.)
Operations available during playback
Pause: Refer to p. 11 @5 Play/Pause button.
Single frame skip (Forward or backward field
advance): Refer to p. 11 @7 JogDial.
Fast forward or fast reverse (Fast-forward or
rewind): Refer to p. 11 @7 Shuttle ring.
Hold playback speed: Refer to p. 12 @8 Shuttle hold
button.
Skip (WJ-HD300 and WJ-HD500 Series): Refer to p.
11 @7 JogDial.
Play the latest recorded image (WJ-HD300 Series
only): Refer to p. 11 !5 Go to last button.
Multiscreen display: Refer to p. 11 !7 Multiscreen
selection button.
Marking (WJ-HD300 Series only): Refer to p. 11 !8 5
Mark button.
4. To stop playback, press the STOP button.
The playback will be stopped.

I Search Playback

Recorders have search playback functions based on
recording times or recording events. When searching play-
back images, you can activate these functions from this
system controller.
Notes:
• WJ-HD100 Series does not support search playback.
• WJ-HD300 Ver. 1.2 or later / WJ-HD200 Ver. 1.24 or
later / WJ-HD220 supports search playback.
G How to Display Search Lists
1. Press the SEARCH/T&D SEARCH button. "Search
Mode" menu will appear on the LCD, and a search list
(date-and-time entry form, record list, or recording
event list, etc.) will be displayed on an active monitor.
Search Mode
Thumb
F1 F2
Example: WJ-HD300 Series
Notes:
• Every pressing the SEARCH/T&D SEARCH button
can change search list display. (For example,
Record list → Thumbnail Display → Record List ...)
• The search list firstly displayed differs depending
on recorders.
2. Perform operations while watching the active monitor.
Note: The operation details differ depending on
recorders. Refer to pp. 46 to 48.
HD300
Text Copy
F3 F4
45