Related Manuals for Panasonic WV-CU550CJ
Summary of Contents for Panasonic WV-CU550CJ
-
Page 1: Operating Instructions
System Controller Operating Instructions WV-CU550CJ Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. -
Page 2: Table Of Contents
You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. For U.S.A WV-CU550CJ... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 4: Preface
Additional features of the WV-CU550CJ include: • Up to 8 WV-CU550CJ System Controllers can be connected in a system by using standard RS-485 shielded 4-wire twisted pair cable. Can also be combined with standard communication media such as modems, fiber optics and microwave. -
Page 5: Precautions
PRECAUTIONS • Refer all work related to the installation of this product to qualified service personnel or system installers. • Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Contact qualified service personnel for maintenance. -
Page 6: Major Operating Controls And Their Functions
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front View ALARM BACK RESET -1CAM Rear View BUSY IRIS FORWARD PRESET CLOSE OPEN ZOOM FOCUS +1CAM STOP TELE NEAR WIDE SLOW CONTROLLER DATA MODE UNIT No. TERM. System Controller WV-CU CONTROLLER... - Page 7 Operations from the System Controller are disabled until this indicator goes off. e Function Buttons (F1/F2/F3/F4) Select functions displayed on the LCD (Liquid Crystal Display) display.
- Page 8 ON 1 MODE CAM-P Mode ON 1 @8 Controller On/Off Switch (CONTROLLER ON/OFF) This switch is used to turn the WV-CU550CJ system controller power on and off. @9 Power Cord NOTE Refer to the Operating Instructions of the WJ-SX550C Matrix Switcher for further details.
-
Page 9: Installation
INSTALLATION System Controller for the WJ-FS616 Series Video Multiplexer When combined this System Controller with the optional WJ-FS616 Series Video Multiplexer, place the display sheets and label on the controller shown below. Refer to the Operating Instructions of WJ-FS616 Series for further details. -
Page 10: System Information
SYSTEM INFORMATION Please note that the following functions were added to improve the operation of the combination cameras. Additions Selection of Pan/Tilt Speed The Pan/Tilt speed can be changed by selecting a mode in the menu (A1) displayed on the LCD display of the con- troller. -
Page 11: Specifications
SPECIFICATIONS Power Supply: Power Consumption: Data Input/Output: Switching Functions: Camera Functions: Lens Functions: Housing: Pan/Tilt: Auxiliary Switch: Unit Number: Ambient Operating Temperature: Ambient Operating Humidity: Dimensions: Weight: Weight and dimensions indicated are approximate. Specifications are subject to change without notice. STANDARD ACCESSORY Data Cable 3 m (9.8 ft.) ... - Page 12 Panasonic Security and Digital Imaging Company A Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838...