Mast Disassembly·inspection·reassembly - Toyota 8FGU 15 Repair Manual Supplement

3-8 3-8
MAST DISASSEMBLY·INSPECTION·REASSEMBLY
1
8
9
Disassembly Procedure
1 Remove the mast fork height switch.
2 Remove the hose cover.
3 Disconnect the high pressure hose.
4 Remove each cylinder rod end set bolt. [Point 1]
5 Remove each cylinder support. [Point 2]
6 Remove each cylinder bottom set bolt.
7 Slide the inner mast upward and remove the lift cylinders.
8 Slide the inner mast downward and remove the lift rollers.
9 Remove the mast strip. [Point 3]
10 Remove the outer mast.
Reassembly Procedure
The reassembly procedure is the reverse of the disassembly procedure.
7
10
4
2
6
5
3
7