Fx-Xx Auxiliary Function - Xinje DS5C Series Manual

4-1-3. FX-XX auxiliary function


F0-XX
Function No. Description
F0-00 Clean the alarm
F0-01 Back to out of factory settings
F0-02 Clean the offset
1. Clean the alarm (F0-00)
Set F0-00=1 to reset the alarm. When the alarm occurred, please find out the alarm reasons
then clean the alarm.
2. Back to out of factory settings (F0-01)
Please power off the servo drive before the operation.
Set F0-01=1, then press ENTER. No need to re-power the servo drive.
3. Clean the offset (F0-02)
Set F0-02=1 to clean the offset.

F1-XX
Function code
F1-00
F1-01
F1-02
F1-05
F1-06
32
Explanation
Jog run
Test run
Current sampling zero calibration
Panel enable
Absolute encoder clear number of
turns