Servo Drive And Motor Wiring; Main Circuit Terminals - Xinje DS5C Series Manual

3.Servo drive and motor wiring

3-1. Main circuit terminals


DS5C-20P1/2/4/7-PTA
Terminal
L/N
●
U, V, W
P+, D, C

Wiring terminals of servo motor
Signal
PE
U
V
W
Function
Power supply input of
main circuit
Vacant terminal
Motor terminals
Internal regenerative
resistor
External regenerative
resistor
40, 60, 80 series motor
4-yellow green
1-brown
3-black
2-blue
Explanation
Single phase AC200~240V, 50/60Hz
-
Connect the motor
(Note: the ground line is on the
cooling fin, please check it before
power on!)
Short P+ and D, disconnect P+ and
C, set P0-24=0
Connect regenerative
between P+ and C, disconnect P+
and D, set P0-24=1, P0-25= power
value, P0-26= resistor value
resistor
23