Lowering Coolant Level - MAHLE MCX-1 Operation Manual

WARNING: WARNING: WARNING: WARNING: Coolant in the vehicle cooling system may be extremely hot and under Coolant in the vehicle cooling system may be extremely hot and under Coolant in the vehicle cooling system may be extremely hot and under Coolant in the vehicle cooling system may be extremely hot and under
great pressure. Wear safety glasses and use protective clothing and great pressure. Wear safety glasses and use protective clothing and great pressure. Wear safety glasses and use protective clothing and great pressure. Wear safety glasses and use protective clothing and
gloves. Use extreme caution when removing radiator cap and hoses. gloves. Use extreme caution when removing radiator cap and hoses. gloves. Use extreme caution when removing radiator cap and hoses. gloves. Use extreme caution when removing radiator cap and hoses.
1. Slowly and carefully remove the cap from the radiator.
2. Remove cap from overflow container.
3. Attach the wand to the black hose. Close the valve.
4. Turn control valve to LOWER RADIATOR & OVERFLOW.
5. Press the top of LOWER RADIATOR & OVERFLOW selector switch to turn on pump.
6. Use the Wand to empty the overflow container and lower the level of coolant in the radiator
to a level just below the upper hose connecting the radiator to the engine. Open valve on
wand as required.
7. Press bottom of LOWER RADIATOR & OVERFLOW selector switch to turn off pump.
8. Replace caps on the radiator and overflow container.

LOWERING COOLANT LEVEL

Green Hose
Black Hose
VERY IMPORTANT
Open valve on want only while end is in fluid.
Do not suck air as the pump may lose its prime.
Page 6
Radiator
Hose
Engine
Wand Block
Water
Pump
Overflow
Radiator
Heater
Core