Table of Contents
Advertisement
8. Remove the Step Adapters from the radiator hose and the Adapter Hose.
9. Remove the Adapter Hose and reattach the radiator hose.
10. Remove the overflow container cap.
11. Install the Wand on the green hose. Close the valve.
12. Turn control valve to FILL RADIATOR & OVERFLOW.
13. Press the top of EXCHANGE COOLANT OR FILL RADIATOR & OVERFLOW selector
switch to turn on the pump.
14. Open the valve on the Wand to fill the radiator and overflow container to the
recommended levels.
15. Replace the radiator cap and overflow container cap.
16. Press the bottom of the EXCHANGE COOLANT OR FILL RADIATOR & OVERFLOW
selector switch and disconnect power cord.
COMPLETING THE JOB
Green Hose
Black Hose
Radiator
Hose
Wand
Radiator
Page 11
Engine
Block
Water
Pump
Overflow
Heater
Core
Advertisement
Table of Contents
