Completing The Job - MAHLE MCX-1 Operation Manual

All used coolant in the vehicle cooling system has now been replaced with new coolant. The
following steps will complete the job.
1. Close the valves on the Step Adapters.
2. Disconnect the black and green hoses from the Step Adapters.
3. Install Wand on black hose. Close the valve.
4. Remove the cap from the radiator.
5. Turn control valve to LOWER RADIATOR & OVERFLOW.
6. Press top of LOWER RADIATOR & OVERFLOW selector switch to turn on pump.
7. Use the Wand to lower the level of coolant in the radiator to a level just below the upper
hose where the Step Adapter is attached. Open valve on Wand as required.

COMPLETING THE JOB

Green Hose
Black Hose
Radiator
Hose
Radiator
Continued on next page . . . Continued on next page . . . Continued on next page . . . Continued on next page . . .
Page 10
Engine
Block
Wand
Water
Pump
Overflow
Heater
Core