Unpacking And Setting Up - Burmester Reference 069 Owner's Manual

CAUTION: The CD player 069 and the external power supply unit (if existent) are very heavy. To avoid injuries
while unpacking it is suggested that only personnel with experiences in heavy weights unpack the units.
CAUTION: The CD player 069 is shipped inside a plastic protective cover. Make sure that children do not play
with it to avoid the danger of suffocation.
Unpacking To avoid damaging the housing, please do not use pointed or sharp tools to open the box.
Please make sure that the content of the box is complete. If something is missing or you
notice any damage while unpacking, do not hook up the unit. Instead, contact your
authorized dealer.
Content of boxes The two boxes should contain the following:
• 1 box with the CD player 069
• 1 CD clamp
• 1 base plate with 4 carbon fiber damping discs
• 1 remote control
• 1 power cord for connecting the CD player to the external power supply unit (if existent)
• 1 AC power cord
• 1 owner's manual
• 1 box with the external power supply unit (if existent)
• 1 base plate with 4 carbon fiber damping discs for the external power supply (if existent)
Packaging We recommend keeping the original packing in case the unit needs to be shipped in the
future.
Setting up Too low or too high temperatures may cause damage inside of the preamp. Therefore
we recommend you leave the unit to adapt to room temperature, before using it for
the first time.
Carefully remove the unit from its packaging and set it up in an appropriate location. To
protect the 069 from overheating make sure that the location offers sufficient air circulation
around the unit. Also, avoid excessive exposure to sun, dust and humidity.
Ventilation ducts and openings in the housing serve to keep the unit cool. They must not be
covered up with magazines, table cloth, curtains etc.
If the 069 has to be operated in an extremely warm environment it may be necessary
to supply additional ventilation. Avoid operating the unit in an excessively humid
environment like bath rooms etc.
Set up variations The feet of the CD player and of the power supply unit are constructed as spikes. They can
either be placed directly on the aluminum of the base plate or on the supplied carbon fiber
damping discs. Using the carbon fiber damping discs additionally decouples the entire
housing acoustically from the ground surface.
We recommend placing the CD player and the power supply unit onto the base plate with
the carbon fiber damping discs.

UNPACKING AND SETTING UP

1