Table of Contents
Advertisement
POWER
The key POWER switches the CD player on or off, provided the mains switch on the rear
panel of the CD player or on the rear panel of the external power supply (if at hand) is set to
ON and the power switch on the front panel is set to STBY.
VOLUME
By pressing either the VOLUME + or VOLUME – buttons you can adjust the sound level.
The level is shown in the VOLUME display (7). Pressing the corresponding key on your
remote control lowers or rises the output volume.
Remember that this feature is only available if the menu item OUTPUT in the SETUP
MENU is set to VARIABLE.
DIM
Pressing the key DIM varies the brightness of the alphanumeric display in four steps
between "max. brightness" to "off".
If brightness is selected to "off", the display will light up only when any controls are used to
change settings. After a few seconds it automatically switches off again.
AUDIO
With the AUDIO key you can choose the rate of the internal sample rate converter: 96kHz
and 192kHz respectively. The setting to 192 kHz will be shown by the light of the AUDIO
LED (11).
For the best sound we recommend the sample rate of 96 kHz.
REPEAT
Pressing the key REPEAT once or several times causes a track or the complete CD to be
repeated. The repeat mode is shown in the alphanumeric display:
- a simple arrow shows the repeating of one track
- a returning arrow shows the repeating of the complete CD
REPEAT A/B
This feature constantly repeats any specific sequence of a CD. The first key press defines
the beginning of the sequence, while the second key press defines the ending, immediately
turning to the start of the sequence.
If a sequence is defined, you can remove its definition by pressing this key again.
D MENU
With the key D MENU you can activate or leave the SYSTEM SETUP.
Numbers 0 to 9
The numerical keypad serves to select a track directly. The playback of the selected track
begins automatically after the selection.
Arrow keys▲ ▼ ► ◄ With the arrow keys (navigation keys) you can select and set menu items in the SYSTEM
SETUP (see chapter SYSTEM SETUP) and programming a favorite track selection of a CD.
PLAY/PAUSE
Pressing the key PLAY/PAUSE starts playback of the CD. The playback can be stopped
(PAUSE mode) by pressing the key PLAY/PAUSE again.
STOP
The playback of the CD can be stopped by pressing the key STOP (STOP mode).
For a restart of the CD at the beginning, press the key PLAY.
SKIP >|
By briefly pressing the key SKIP >| playback is advanced to the beginning of the following
track. By pressing it several times you can skip ahead one step at a time.
REMOTE CONTROL
15
Advertisement
Table of Contents
