Related Manuals for urmet domus RTE-EES
Summary of Contents for urmet domus RTE-EES
- Page 1 RTE-EES SBD Emergency exit system PRESS TO EXIT EMERGENCY ONLY PRESS TO ESCAPE Installation guide...
- Page 2 V2 March 2019 Extract from Description The Urmet RTE-EES Emergency Exit System meets the above Secure by design requirement. The devices are suitable for use with fail safe releases and maglocks. Not fail secure (fail locked) releases. PRESS TO EXIT...
-
Page 3: Technical Features
Technical features The Emergency Exit System is designed to meet BS7273-4 Type A activation requirements, but using a timed automatic reset and not a mechanical reset. Fail safe feature – double pole button, triggers the access control system to Security feature – These provide door open timing and outputs signal the use of simultaneously mechanically... -
Page 4: Cabling Requirements
Cabling requirements Access control Access control or door entry system with door Auxiliary Auxiliary system with lock output contact input output 1 output 1 relay and exit switch input PRESS TO EXIT EMERGENCY Auxiliary ONLY input - N/C Door Fireman’s override contact switch input - N/C PRESS TO ESCAPE... -
Page 5: Connection Diagram
Connection diagram... -
Page 6: Auxiliary Outputs
Additional inputs The device is provided with an input for a Fireman’s override switch and an input for any normally closed Aux NC auxiliary devices or systems. Lock out If these are not being used, then the connections must be linked out. FB KEY Auxiliary outputs Two auxiliary outputs are provided. - Page 7 Timing ranges – The timing ranges are approximately Panel lock trig 1, 6, 12 and 24 minutes. Panel lock relay The default setting is 1 minute. Aux NC Circuit supply Lock out Lock supply FB KEY Timing ranges 1 Minute 6 Minutes 12 Minutes 24 Minutes...
- Page 8 Commissioning the exit switches In certain fault conditions the timing circuit for the PRESS TO ESCAPE button will not function. In this case the PRESS TO ESCAPE button will mechanically break the power to the release but only while the button is being pressed, meaning that as soon as the button is released the door will lock again.
- Page 9 Dimensions Rear view of surface box Surface version 4 x 5mm diameter 60mm fixing holes 172mm 140mm 127mm 2 x 20mm diameter conduit entry points 172mm 45mm 30mm 27mm 52mm 77mm 104mm 105mm 60mm Flush version Rear view of flush box 50mm 84mm 20mm diameter...
- Page 10 URMET COMMUNICATION AND SECURITY UK LTD Urban Hive, Skyline 120, Avenue West, Great Notley, Essex. CM77 7AA www.urmet.co.uk...
Need help?
Do you have a question about the RTE-EES and is the answer not in the manual?
Questions and answers