Wall-Mount Unit Architecture - Bard MULTI-TEC W18AAPA Installation And Service Instructions Manual

Table of Contents

Advertisement

WALL-MOUNT UNIT ARCHITECTURE

CAUTION: This Bard Free Cooling Unit System has been pre-programmed with what is widely considered to be the
best settings for efficiency and operation. Any changes to internal programming through the LC6000 controller or
the TEC-EYE
not covered within this manual may cause the systems to operate improperly, cause internal damage
TM
to the HVAC units, cause the shelter to overheat or other very serious consequences. Although complete controller
programming architecture for the wall-mount unit controller has been provided, going outside the boundaries of what
has been covered in this manual is not recommended.
Screen
Menu Item
STATUS SCREEN
RAT
MAT
OAT
OAH
ODP
Blower
Damper
Unit Status
Press UP or DOWN Arrow Key to Icon, then ENTER Key
QUICK MENU
Data Log
Data Logger Record
Record Number
Time
Date
Description
Event
NOTE: Data Log will have as many screens as events ocurred using same format.
Press BACK Key
Press DOWN Key
Press ENTER Key
Info
Last Hour Tracking
Freecool Run
Manual 2100-665A
Page
44 of 51
Range
Default Value
-999.9 to 999.9
-999.9 to 999.9
-999.9 to 999.9
-999.9 to 999.9
-999.9 to 999.9
ON/OFF
0-100%
Active, Waiting,
Unit On,
Off by Alarm,
Off by pLan,
Off by BMS,
Off by Clock,
Off by Input,
Off by Keypad,
Off by Manual,
Off by LC
0-99
00:00 - 23:59
00/00/00 -
12/31/99
Text
Start/Stop
0-59
Description
-
Return air temperature
-
Mixed air temperature
Outdoor air temperature (if equipped
-
with economizer)
Outdoor air humidity (if equipped with
-
economizer)
Outdoor dew point (if equipped with
-
economizer)
-
Blower status
Damper position (if equipped with
-
economizer)
-
Unit status
Heading
Record number (located in upper right
-
hand corner)
-
Time of the alarm event
-
Date of the alarm event
-
Description of the alarm event
Describes if entry is beginning or end of
-
event
-
Number of minutes in last hour

Advertisement

Table of Contents
loading

Table of Contents