Figure 2.10 Adjusting Cooling Differential Values; Figure 2.11 Adjusting Heating Differential Values; Figure 2.12 Wall-Mount Unit Heating Staging - Bard MULTI-TEC W18AAPA Installation And Service Instructions Manual

To adjust these parameters:
1. Press MENU key to go to the Main Menu screen.
2. Press UP or DOWN keys and ENTER key to enter
USER password 2000.
3. Press UP or DOWN keys to scroll to Sys Config;
press ENTER key.
4. Press UP or DOWN keys to scroll to Cooling Setup
(A2); press ENTER key.
5. Press ENTER key to scroll to Stage 1 Diff On,
Stage 1 Diff Off, Stage 2 Diff On, Stage 2 Diff Off,
Stage 3 Diff On or Stage 3 Diff Off (see Figure
2.10).
6. Press UP or DOWN keys to adjust value.
7. Press ENTER key to save.
FIGURE 2.10
Adjusting Cooling Differential Values
Heating Sequence (see Figure 2.12)
If the control value is below 58°F (Setpoint + Stage
1 Diff On), the unit will enable electric heat stage 1.
If the control value is below 57°F (Setpoint + Stage
2 Diff On), the unit will enable electric heat stage 2.
Stage 1
Stage 2
Stage 3
55
Manual 2100-665A
Page 30 of 51
FIGURE 2.12
MULTI-TEC Wall-Mount Unit Heating Staging
Stage 1 Diff On
Stage 2 Diff On
Stage 3 Diff On
Stage 3 Diff Off
56 57 58
If the control value is below 56°F (Setpoint + Stage 3
Diff On), the unit will enable electric heat stage 3.
To adjust these parameters:
1. Press MENU key to go to the Main Menu screen.
2. Press UP or DOWN keys and ENTER key to enter
USER password 2000.
3. Press UP or DOWN keys to scroll to Sys Config;
press ENTER key.
4. Press UP or DOWN keys to scroll to Heating Setup
(A3); press ENTER key.
5. Press ENTER key to scroll to Stage 1 Diff On,
Stage 1 Diff Off, Stage 2 Diff On, Stage 2 Diff Off,
Stage 3 Diff On or Stage 3 Diff Off (see Figure
2.11).
6. Press UP or DOWN keys to adjust value.
7. Press ENTER key to save.
Adjusting Heating Differential Values
Stage 1 Diff Off
Stage 2 Diff Off
Setpoint
59 60 61
On Band Off
FIGURE 2.11
62 63 64 65