Operation
Configuration (Static Mode)
To set the Ilumipod SL to operate in a static or strobing color without DMX:
1. Go to the STATIC main level.
2. Select the parameter to configure, from:
•
RED,
•
GREEN,
•
BLUE,
•
COOL (lime),
•
SOLID (no function), or
•
STROBE
3. Set the selected parameter to the desired level, from 000–255.
4. Repeat until the static mode is set as desired.
Configuration (Settings)
Dimmer Speed
To set the dimmer speed:
1. Go to the DIMMER main level.
2. Select the dimmer speed from OFF (linear dimmer), DIM1 (fastest), DIM2, DIM3,
or DIM4 (slowest).
Color Calibration
There are 4 color calibration options for the Ilumipod SL: OFF (maximum output/unbalanced white),
RGBTOW (quad-color calibration), UC ("universal", tri-color calibration to match legacy products), and the
color macro WHITE 1–11 settings.
To select the color calibration mode:
1. Go to the SETTINGS main level.
2. Select the COLOR option.
3. Select the calibration mode, from OFF, RGBTOW, or UC.
Color Macro White Balance
To adjust the color macro white balance:
1. Go to the CALIB main level.
2. Select the macro to adjust, from WHITE 1–11.
3. Select the color level to adjust, from RED, GREEN, BLUE, or COOL (lime).
4. Set the level of the selected color, from 000–255.
5. Repeat until the white balances are set as desired.
RGBTOW Mode
To adjust the color calibration in RGBTOW mode:
1. Go to the CALIB main level.
2. Select the RGBTOW option.
3. Select the color level to adjust, from RED, GREEN, BLUE, or COOL (lime).
4. Set the level of the selected color, from 000–255.
5. Repeat until the calibration is set as desired.
Universal Calibration
To adjust the color calibration in UC mode:
1. Go to the UC-CALIB main level.
2. Select the color level to adjust, from RED, GREEN, or BLUE.
3. Set the level of the selected color, from 000–255.
4. Repeat until the calibration is set as desired.
Factory Reset
To reset the product to factory default settings:
1. Go to the SETTINGS main level.
2. Select the RESET option.
3. Select from NO (cancel) or YES (reset).
Ilumipod SL User Manual Rev. 4
12