Table of Contents
Advertisement
Operation
4. Operation
RDM2go Control
The Ilumipod SL requires an external controller, such as the RDM2go (from Chauvet Professional), to
change its configuration.
Menu Map
Refer to the Ilumipod SL product page on
The Ilumicode section of the RDM2go (from Chauvet Professional) is required to access the full menu of
options. For more information, download the RDM2go User Manual from www.chauvetprofessional.com.
Main Level
Programming Levels
GREEN
STATIC
STROBE
DIMMER
WHITE
(1–11)
CALIB
RGBTOW
PERSON
DMX
UC-CALIB
GREEN
COLOR
SETTINGS
RESET
Ilumipod SL User Manual Rev. 4
www.iluminarc.com
RED
BLUE
000–255 Configures the static color and effect
COOL
SOLID
OFF
DIM1–4
RED
GREEN
000–255
BLUE
COOL
ARC1
ARC1+D
ARC2
ARC2+D
ARC FULL
SOLID
SPECIAL2
001–512
RED
000–255 Universal color calibration
BLUE
OFF
RGBTOW
UC
NO
YES
for the latest menu map.
Description
Dimmer works in linear mode
Dimmer works in non-linear mode, from fastest (DIM1) to
slowest (DIM4)
Determines the white balance for the color macros
Determines the white balance when RGBTOW is active
3-channel: RGB control
4-channel: dimmer, RGB control
4-channel: RGBL control
5-channel: dimmer, RGBL control
8-channel: dimmer, RGB control, preset colors, color
temperature, strobe, dimmer speed
1-channel: LED control
9-channel: dimmer, RGBL control, preset colors, color
temperature, strobe, dimmer speed
Selects DMX address
(highest channel restricted to personality chosen)
Maximum output, unbalanced white
White output is determined by the CALIB > RGBTOW settings
Output matches that of product's previous versions
Resets unit to factory default settings
8
Advertisement
Table of Contents
