Configuration (Dmx); Control Personalities; Starting Address; Control Channel Assignments And Values - Iluminarc ILUMIPODSL User Manual

Hide thumbs Also See for ILUMIPODSL:
Table of Contents

Advertisement

Configuration (DMX)

Use control configurations to operate the product with a DMX controller.

Control Personalities

To set the control personality:
1. Go to the PERSON main level.
2. Select the desired personality, from ARC1, ARC1+D, ARC2, ARC2+D, ARC FULL, SOLID, or
SPECIAL2.
See the

Starting Address

personality.
Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the DMX main level.
2. Select the starting address (001–512).

Control Channel Assignments and Values

ARC

1+D
1
2
1
1
2
1
2
3
2
3
4
3
4

SOLID (1 Channel)

Channel Function
1
Dimmer
9
section for the highest starting address that can be selected for each
Personality
Channels
ARC1
3
ARC1+D
4
ARC2
4
ARC2+D
5
ARC FULL
8
SOLID
1
SPECIAL2
9
2+D
FULL
Function
1
1
Dimmer
2
2
Red
3
3
Green
4
4
Blue
5
Lime
5
Preset colors
Color
6
temperature
7
Strobe
8
Dimmer speed
Value
000  255 All LEDs (0–100%)
Highest Starting Address
510
509
509
508
505
512
504
Value
000  255
000  255
000  255
000  255
000  255
000  255
000  255
000  009
010  255
000  009
010  029
030  069
070  129
130  189
190  255
Percent/Setting
Operation
Percent/Setting
0–100%
0–100%
0–100%
0–100%
0–100%
See
Preset Colors Chart
See
Color Temperature Chart
No function
Strobe, slow to fast
No function
Off
DIM1 (fastest)
DIM2
DIM3
DIM4 (slowest)
Ilumipod SL User Manual Rev. 4

Advertisement

Table of Contents
loading

Table of Contents