What's Included; Getting Started; Important Safeguards - Kaiterra Sensedge Manual

Sensedge User Manual

What's Included

Sensedge Sensedge
sensor modules x 2
USB-C cable Charger
ESD bag

Important Safeguards

Please read the safety warnings before use and take the necessary precautions to reduce the risk of
fire, electric shock, or injury. The Kaiterra limited warranty applies only if the unit is used according
to these instructions.
WARNING
·
To reduce safety risks, always use service personnel from the manufacturer or service provider, or
other qualified personnel for installation and maintenance.
·
Make sure the power is OFF during installation or maintenance.
·
DO NOT tamper with or use nonofficial spare parts for repair or maintenance.
·
DO NOT use the device in environments with high humidity or possible direct exposure to water.
·
DO NOT use the device in an outdoor environment.
·
DO NOT use the device near heat sources such as radiators, furnaces, ovens, or stoves.
1
Faceplate Drywall screws and Backplate screw
anchors (4 pairs)
Charger User manual Certificate of
adapters x 5 calibration and testing

Getting Started

The Sensedge is a building-grade air quality monitor. This user manual will provide a basic guide to
its first use. Further information can be found on the Kaiterra Support Portal at
https://support.kaiterra.com/sensedge
2 4 7
9 1 3 8 6 5
Ethernet port
USB-A port
1 4
MicroSD card slot*
Module
2 5
USB-C port Module status light
3 6
*32GB maximum
Externals and Air Flow
Air is drawn into the Sensedge from both the modules on the lower side, as well as the air intake on
the upper side. It is vital that neither side of the device is covered. Any changes in airflow may affect
the readings and accuracy.
Power and Connectivity
Power:
USB-C: Only use the cable and charger/adapter supplied with the device
Connectivity:
2.4GHz Wi-Fi (802.11b/g/n)
Ethernet
10
Air intake Touchscreen
7 10
Air intake
8
Power button
9
2