Crestron FlipTop FT2 Series Quick Start Manual
Cable management system, 700 size, mechanical, pass-through lid
Hide thumbs
Also See for FlipTop FT2 Series:
- Quick start manual (11 pages) ,
- Quick start (2 pages) ,
- Manual (2 pages)
Advertisement
Quick Links
FT2-700-MECH-PTL
FlipTop™ FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid
The Crestron®
FT2-700-MECH-PTL
installs into a table or other horizontal surface to provide modular
connectivity. It features a retracting lid that disappears within the
enclosure. When the lid is retracted, 12 module slots are arranged in two
rows of six. The flexible modular design may also be customized with an
assortment of Crestron accessories, and the pass-through lid style
allows cables to be fully extended while the lid is closed.
For more information about the accessories, please visit
www.crestron.com/Crestron-FlipTops. To configure your FlipTop, launch
the
FlipTop Configuration
Tool.
In the Box
FT2-700-MECH-PTL
1
Additional Items
3
Locking Bars with screws and gaskets (4532479)
Cutout Template (4527491)
1
FlipTop™ cable management system
Quick Start
1
Advertisement
Related Manuals for Crestron FlipTop FT2 Series
Summary of Contents for Crestron FlipTop FT2 Series
- Page 1 When the lid is retracted, 12 module slots are arranged in two rows of six. The flexible modular design may also be customized with an assortment of Crestron accessories, and the pass-through lid style allows cables to be fully extended while the lid is closed.
- Page 2 Quick Start FT2-700-MECH-PTL FlipTop™ FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid 1. Loosen the four socket screws that secure the two mounting plates and the FT-600 FlipTop assembly to the surface. Mount the FlipTop Assembly 2. Remove the FT-600 FlipTop assembly. 3.
-
Page 3: Install The Modules
3. Carefully tighten the four swiveling dogs in each corner of the FlipTop The following sections provide best practices and installation procedures assembly clockwise until the FT2 assembly is secured in place against for pass-through cable modules and blank plate modules. - Page 4 Quick Start FT2-700-MECH-PTL FlipTop™ FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid Installing the Pass-Through Cable Module with 4K Cables 3. Attach the side plate to the module by snapping the plastic clips on the plate into the two slots on the module. The included grommet is not needed when installing most 4K cables.
- Page 5 Quick Start FT2-700-MECH-PTL FlipTop™ FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid 5. Insert the cable plate into one of the three slots in the pass-through 6. Attach the side plate to the module by snapping the plastic clips on module.
- Page 6 Quick Start FT2-700-MECH-PTL FlipTop™ FT2 Series Cable Management System, 700 Size, Mechanical, Pass-Through Lid Install the Blank and Keystone Plate Module Blank plate modules (sold separately) fill empty slots in module rows, Install the Locking Bars and keystone plate modules (sold separately) allow for cables terminated with standard keystone jacks to be installed in the FT2 To install the locking bars: assembly.
-
Page 7: Install The Bezel
The lid retracts into the assembly. 2. Access the modules in the FT2 assembly. 3. Close the lid by lifting it vertically and returning it over the FT2 assembly. Visit the Product Page Scan the QR code to visit the product page. FT2-700-MECH-PTL www.crestron.com/model/6511980... - Page 8 Crestron, the Crestron logo, and FlipTop are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Cable Cubby is either a trademark or registered trademark of Extron Electronics in the United States and/or other countries.